Discussion:
minidump of Sql Server 2000
(too old to reply)
CDG
2007-07-24 12:10:04 UTC
Permalink
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
I've this problem:

Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe

Can you help please?
--
CDG
--
CDG
Pat Styles [MSFT]
2007-07-25 07:25:44 UTC
Permalink
Hello.

You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header in the
minidump.

.pat styles (microsoft)

"CDG" <***@discussions.microsoft.com> wrote in message news:C91F1A82-400B-40BE-9A48-***@microsoft.com...
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
I've this problem:

Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe

Can you help please?
--
CDG
--
CDG
CDG
2007-07-25 12:38:01 UTC
Permalink
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
The output is the following:

start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....

I've a problem for load symbols for sqlservr module.
In SymbolPathName i write:
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols

After, i run .reload
How I make to add symbols for sqlservr?

Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header in the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
Pat Styles [MSFT]
2007-07-25 16:14:08 UTC
Permalink
Hello CDB?

Are you reading the help sections I asked you to? You may need to read more
than just one page. Look through the table of contents and read more about
symbols. I see that you are not using "!sym noisy". This will show more
about the error you are experiencing. It is probably a simple case that the
symbols you want are not available.

.pat styles [microsoft]

"CDG" <***@discussions.microsoft.com> wrote in message news:9E3570A2-EA1F-442D-8B40-***@microsoft.com...
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
The output is the following:

start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....

I've a problem for load symbols for sqlservr module.
In SymbolPathName i write:
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols

After, i run .reload
How I make to add symbols for sqlservr?

Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header in the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
CDG
2007-07-26 13:32:09 UTC
Permalink
Thanks a lot. Was missed sqlservr.exe on path symbol.
What is the problem in this stack trace?

Thanks in advance.

*** Stack trace for last set context - .thread/.cxr resets it
# ChildEBP RetAddr Args to Child
00 11cad3a4 009baabc 000030a4 92ed459e 11cae084
sqlservr!DoMiniDumpNoContext+0x52
01 11cadbf8 006ee757 25f59610 11cae084 0000013f sqlservr!stackTrace+0x3a1
02 11cae1a0 005fa686 0000004f 00000057 00000016 sqlservr!ex_raise2+0x178
03 11cae1d0 0061f3a4 0000004f 00000057 00000016 sqlservr!ex_raise+0x63
04 11cae318 0042963e 25f4a670 11cae338 0085d665 sqlservr!RecBase::Resize+0xd4
05 11cae324 0085d665 00000006 11cae3b0 25f4a660 sqlservr!RecBase::IsNull+0x14
06 11cae338 0041d20e 11cae3b0 11cae354 25f574f4
sqlservr!TCValSSInRow<61,1,1>::GetDataX+0x26
07 11cae388 0042b895 25f4a690 00000001 25f4a3a4
sqlservr!CEs::FastCompare1+0x32
08 11cae3d8 0042a380 00000001 00000001 25f4a710 sqlservr!SDES::GetBiDi+0x567
09 11cae3f4 004298f7 25f4a3a4 00000000 00000001
sqlservr!RowsetSS::FetchNextRow+0xa1
0a 11cae420 004dc401 00000001 25f50274 11cae448
sqlservr!CQScanRowset::GetRowWithPrefetch+0x3e
0b 11cae440 0043288b 25f50270 00000000 25f50270
sqlservr!CQScanTableScan::GetRow+0x6b
0c 11cae52c 0042f0d1 25f50270 00000000 25f51340
sqlservr!CQScanHashMatch::Iterate+0xa4e
0d 11cae540 0043288b 25f50270 00000000 00000000
sqlservr!CQScanHashMatch::GetRow+0xa8
0e 11cae62c 00432542 25f50270 25f51300 00000000
sqlservr!CQScanHashMatch::Iterate+0xa4e
0f 11cae644 0041d396 25f50270 25f50270 25f51290
sqlservr!CQScanHashMatch::Open+0x6c
10 11cae65c 0041d396 25f50270 00000000 25f50270 sqlservr!CQScan::Open+0x22
11 11cae674 0041d3ee 25f50270 25f50270 25f51140 sqlservr!CQScan::Open+0x22
12 11cae688 005b810a 25f50270 25f51028 25f51140 sqlservr!CQScanTop::Open+0x12
13 11cae6a8 005b8266 25f50270 00000000 11cae6d0
sqlservr!CQScanSort::BuildSortTable+0x23
--
CDG
Post by Pat Styles [MSFT]
Hello CDB?
Are you reading the help sections I asked you to? You may need to read more
than just one page. Look through the table of contents and read more about
symbols. I see that you are not using "!sym noisy". This will show more
about the error you are experiencing. It is probably a simple case that the
symbols you want are not available.
.pat styles [microsoft]
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....
I've a problem for load symbols for sqlservr module.
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
After, i run .reload
How I make to add symbols for sqlservr?
Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header in the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
Ivan Brugiolo [MSFT]
2007-07-28 16:49:34 UTC
Permalink
This does not look any generic problem or debugger problem.
Maybe a SQL-related group can be of better help.
--
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Post by CDG
Thanks a lot. Was missed sqlservr.exe on path symbol.
What is the problem in this stack trace?
Thanks in advance.
*** Stack trace for last set context - .thread/.cxr resets it
# ChildEBP RetAddr Args to Child
00 11cad3a4 009baabc 000030a4 92ed459e 11cae084
sqlservr!DoMiniDumpNoContext+0x52
01 11cadbf8 006ee757 25f59610 11cae084 0000013f sqlservr!stackTrace+0x3a1
02 11cae1a0 005fa686 0000004f 00000057 00000016 sqlservr!ex_raise2+0x178
03 11cae1d0 0061f3a4 0000004f 00000057 00000016 sqlservr!ex_raise+0x63
04 11cae318 0042963e 25f4a670 11cae338 0085d665
sqlservr!RecBase::Resize+0xd4
05 11cae324 0085d665 00000006 11cae3b0 25f4a660
sqlservr!RecBase::IsNull+0x14
06 11cae338 0041d20e 11cae3b0 11cae354 25f574f4
sqlservr!TCValSSInRow<61,1,1>::GetDataX+0x26
07 11cae388 0042b895 25f4a690 00000001 25f4a3a4
sqlservr!CEs::FastCompare1+0x32
08 11cae3d8 0042a380 00000001 00000001 25f4a710
sqlservr!SDES::GetBiDi+0x567
09 11cae3f4 004298f7 25f4a3a4 00000000 00000001
sqlservr!RowsetSS::FetchNextRow+0xa1
0a 11cae420 004dc401 00000001 25f50274 11cae448
sqlservr!CQScanRowset::GetRowWithPrefetch+0x3e
0b 11cae440 0043288b 25f50270 00000000 25f50270
sqlservr!CQScanTableScan::GetRow+0x6b
0c 11cae52c 0042f0d1 25f50270 00000000 25f51340
sqlservr!CQScanHashMatch::Iterate+0xa4e
0d 11cae540 0043288b 25f50270 00000000 00000000
sqlservr!CQScanHashMatch::GetRow+0xa8
0e 11cae62c 00432542 25f50270 25f51300 00000000
sqlservr!CQScanHashMatch::Iterate+0xa4e
0f 11cae644 0041d396 25f50270 25f50270 25f51290
sqlservr!CQScanHashMatch::Open+0x6c
10 11cae65c 0041d396 25f50270 00000000 25f50270 sqlservr!CQScan::Open+0x22
11 11cae674 0041d3ee 25f50270 25f50270 25f51140 sqlservr!CQScan::Open+0x22
12 11cae688 005b810a 25f50270 25f51028 25f51140
sqlservr!CQScanTop::Open+0x12
13 11cae6a8 005b8266 25f50270 00000000 11cae6d0
sqlservr!CQScanSort::BuildSortTable+0x23
--
CDG
Post by Pat Styles [MSFT]
Hello CDB?
Are you reading the help sections I asked you to? You may need to read more
than just one page. Look through the table of contents and read more about
symbols. I see that you are not using "!sym noisy". This will show more
about the error you are experiencing. It is probably a simple case that the
symbols you want are not available.
.pat styles [microsoft]
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....
I've a problem for load symbols for sqlservr module.
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
After, i run .reload
How I make to add symbols for sqlservr?
Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header
in
the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
CDG
2007-07-30 07:04:01 UTC
Permalink
I think that is correct this group.
I'm using windbg.
--
CDG
Post by Ivan Brugiolo [MSFT]
This does not look any generic problem or debugger problem.
Maybe a SQL-related group can be of better help.
--
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Post by CDG
Thanks a lot. Was missed sqlservr.exe on path symbol.
What is the problem in this stack trace?
Thanks in advance.
*** Stack trace for last set context - .thread/.cxr resets it
# ChildEBP RetAddr Args to Child
00 11cad3a4 009baabc 000030a4 92ed459e 11cae084
sqlservr!DoMiniDumpNoContext+0x52
01 11cadbf8 006ee757 25f59610 11cae084 0000013f sqlservr!stackTrace+0x3a1
02 11cae1a0 005fa686 0000004f 00000057 00000016 sqlservr!ex_raise2+0x178
03 11cae1d0 0061f3a4 0000004f 00000057 00000016 sqlservr!ex_raise+0x63
04 11cae318 0042963e 25f4a670 11cae338 0085d665
sqlservr!RecBase::Resize+0xd4
05 11cae324 0085d665 00000006 11cae3b0 25f4a660
sqlservr!RecBase::IsNull+0x14
06 11cae338 0041d20e 11cae3b0 11cae354 25f574f4
sqlservr!TCValSSInRow<61,1,1>::GetDataX+0x26
07 11cae388 0042b895 25f4a690 00000001 25f4a3a4
sqlservr!CEs::FastCompare1+0x32
08 11cae3d8 0042a380 00000001 00000001 25f4a710
sqlservr!SDES::GetBiDi+0x567
09 11cae3f4 004298f7 25f4a3a4 00000000 00000001
sqlservr!RowsetSS::FetchNextRow+0xa1
0a 11cae420 004dc401 00000001 25f50274 11cae448
sqlservr!CQScanRowset::GetRowWithPrefetch+0x3e
0b 11cae440 0043288b 25f50270 00000000 25f50270
sqlservr!CQScanTableScan::GetRow+0x6b
0c 11cae52c 0042f0d1 25f50270 00000000 25f51340
sqlservr!CQScanHashMatch::Iterate+0xa4e
0d 11cae540 0043288b 25f50270 00000000 00000000
sqlservr!CQScanHashMatch::GetRow+0xa8
0e 11cae62c 00432542 25f50270 25f51300 00000000
sqlservr!CQScanHashMatch::Iterate+0xa4e
0f 11cae644 0041d396 25f50270 25f50270 25f51290
sqlservr!CQScanHashMatch::Open+0x6c
10 11cae65c 0041d396 25f50270 00000000 25f50270 sqlservr!CQScan::Open+0x22
11 11cae674 0041d3ee 25f50270 25f50270 25f51140 sqlservr!CQScan::Open+0x22
12 11cae688 005b810a 25f50270 25f51028 25f51140
sqlservr!CQScanTop::Open+0x12
13 11cae6a8 005b8266 25f50270 00000000 11cae6d0
sqlservr!CQScanSort::BuildSortTable+0x23
--
CDG
Post by Pat Styles [MSFT]
Hello CDB?
Are you reading the help sections I asked you to? You may need to read more
than just one page. Look through the table of contents and read more about
symbols. I see that you are not using "!sym noisy". This will show more
about the error you are experiencing. It is probably a simple case that the
symbols you want are not available.
.pat styles [microsoft]
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....
I've a problem for load symbols for sqlservr module.
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
After, i run .reload
How I make to add symbols for sqlservr?
Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header
in
the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
Ivan Brugiolo [MSFT]
2007-07-30 12:34:12 UTC
Permalink
WinDbg is a debugger, and this group provides support
for a debugger, not for a specific application.
There isn't much that can be helped out with windbg and the stack below.
--
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Post by CDG
I think that is correct this group.
I'm using windbg.
--
CDG
Post by Ivan Brugiolo [MSFT]
This does not look any generic problem or debugger problem.
Maybe a SQL-related group can be of better help.
--
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Post by CDG
Thanks a lot. Was missed sqlservr.exe on path symbol.
What is the problem in this stack trace?
Thanks in advance.
*** Stack trace for last set context - .thread/.cxr resets it
# ChildEBP RetAddr Args to Child
00 11cad3a4 009baabc 000030a4 92ed459e 11cae084
sqlservr!DoMiniDumpNoContext+0x52
01 11cadbf8 006ee757 25f59610 11cae084 0000013f
sqlservr!stackTrace+0x3a1
02 11cae1a0 005fa686 0000004f 00000057 00000016
sqlservr!ex_raise2+0x178
03 11cae1d0 0061f3a4 0000004f 00000057 00000016 sqlservr!ex_raise+0x63
04 11cae318 0042963e 25f4a670 11cae338 0085d665
sqlservr!RecBase::Resize+0xd4
05 11cae324 0085d665 00000006 11cae3b0 25f4a660
sqlservr!RecBase::IsNull+0x14
06 11cae338 0041d20e 11cae3b0 11cae354 25f574f4
sqlservr!TCValSSInRow<61,1,1>::GetDataX+0x26
07 11cae388 0042b895 25f4a690 00000001 25f4a3a4
sqlservr!CEs::FastCompare1+0x32
08 11cae3d8 0042a380 00000001 00000001 25f4a710
sqlservr!SDES::GetBiDi+0x567
09 11cae3f4 004298f7 25f4a3a4 00000000 00000001
sqlservr!RowsetSS::FetchNextRow+0xa1
0a 11cae420 004dc401 00000001 25f50274 11cae448
sqlservr!CQScanRowset::GetRowWithPrefetch+0x3e
0b 11cae440 0043288b 25f50270 00000000 25f50270
sqlservr!CQScanTableScan::GetRow+0x6b
0c 11cae52c 0042f0d1 25f50270 00000000 25f51340
sqlservr!CQScanHashMatch::Iterate+0xa4e
0d 11cae540 0043288b 25f50270 00000000 00000000
sqlservr!CQScanHashMatch::GetRow+0xa8
0e 11cae62c 00432542 25f50270 25f51300 00000000
sqlservr!CQScanHashMatch::Iterate+0xa4e
0f 11cae644 0041d396 25f50270 25f50270 25f51290
sqlservr!CQScanHashMatch::Open+0x6c
10 11cae65c 0041d396 25f50270 00000000 25f50270
sqlservr!CQScan::Open+0x22
11 11cae674 0041d3ee 25f50270 25f50270 25f51140
sqlservr!CQScan::Open+0x22
12 11cae688 005b810a 25f50270 25f51028 25f51140
sqlservr!CQScanTop::Open+0x12
13 11cae6a8 005b8266 25f50270 00000000 11cae6d0
sqlservr!CQScanSort::BuildSortTable+0x23
--
CDG
Post by Pat Styles [MSFT]
Hello CDB?
Are you reading the help sections I asked you to? You may need to
read
more
than just one page. Look through the table of contents and read more about
symbols. I see that you are not using "!sym noisy". This will show more
about the error you are experiencing. It is probably a simple case
that
the
symbols you want are not available.
.pat styles [microsoft]
Hi Pat,
thanks for your help. I've used "lm" command in windbg.
start end module name
00400000 00cbb000 sqlservr T (no symbols)
0ad30000 0ad88000 netapi32 (deferred)
0ad90000 0ada4000 authz (deferred)
0b790000 0b79d000 sqlvdi (deferred)
....
....
I've a problem for load symbols for sqlservr module.
SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
After, i run .reload
How I make to add symbols for sqlservr?
Thanks in advance,
--
CDG
Post by Pat Styles [MSFT]
Hello.
You need to check out the debugger help on "symbols". The section called
"Verifying Symbols" should be most illuminating. It appears from this
information that you are unable to match an image to the image header
in
the
minidump.
.pat styles (microsoft)
Hi,
i'm analyzing minidump of Sql Server 2000 EE with Windbg.
Unable to load image C:\Program Files\Microsoft SQL
Server\MSSQL$I6\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
*** ERROR: Module load completed but symbols could not be loaded for
sqlservr.exe
Can you help please?
--
CDG
--
CDG
Loading...